Capture every sound in the room with two AKG omnidirectional microphones, and then easily use those recordings to meet your specific needs. Listen to them in high-quality stereo sound. Transcribe them using the compatible Olympus Transcriptions Kits. Or easily download them to a PC for future use. Whether from a boardroom, a courtroom, or anywhere in-between, audio recorded with the Digital Conference Microphone Kit is clearly your best solution.

For use with a digital stereo recorder using standard 3.5mm plugs. (most digital recorders on the market use these plugs.

Two AKG omnidirectional microphones

Tabletop Tripod Stands

Type
Electret condenser microphone (ME30) x2

Frequency Response
20 - 20,000Hz

Sensitivity
-38dB at 11 kHz (0dB = 1V/Pa)

Output Impedance
1.9 kilo-ohms

Power Supply
Plug-in-power system (1.5V - 9V)

Output Plug Type
3.5mm mini-plug

External Dimensions
12.2mm (greatest dimension ) x 64mm

Cord Length
2.5m

2x 2-Channel Professional Table Top Conference Microphones (ME30)

2x Mini-Tripod

1 Adaptor (PA8)

Carrying Case

The xTag Wireless Microphone is ideal for podcasting, VoIP, SKYPE, web conferencing, distance education, speech recognition, and many other audio applications. The xTag Wireless Microphone does not require any device drivers or other software, so it installs immediately. It charges via the USB port.

No wire to constrain your movement! The wireless capability, small form factor with no headset, makes the xTag USB Wireless Microphone a comfortable alternative.

The xTag has a rechargeable battery that provides eight hours of talk time after each full charge. The unit will be charged any time the microphone is in the Charger Base and USB cable is connected.   The xTag recharges to 85% capacity in approximately 45 minutes. 

All of Revolabs Wireless Microphones use 128-bit encryption, so that no one can listen into your discussions.  This is critical for HIPAA-compliance, if you are a physician and using speech recognition software to record patient notes.

The xTag is a plug-and-play USB device that is instantly recognized by all operating systems and is immediately usable out of its box.  It does not require any software drivers for configuration.

Radio Frequency
1.92 - 1.93 GHz (DECT in UPCS)

Encryption
128 bit

Connector
Mini USB-5 pin connector

Range
65' (20 m) approximately. Out-of-range alarm

Battery
Lithium Polymer. Up to 8 hours talk time

Audio Bandwidth
100-6800 Hz

Microphone Dimensions
9 in x 8 in x 2.6 in

Microphone Weight
.05 lbs

Charging Base Dimensions
3.9 in x 2.4 in x 1.0 in

Charging Base Weight
.5 lbs

xTag Wireless Microphone with Charging Base

USB Cable

Lanyard

Earpiece

The Voice Tracker™ Array Microphone improves signal-to-noise ratios in two ways. First, its digital signal processor creates a listening beam (like a searchlight) that focuses on the talker and spatially filters noise from other directions. Second, its proprietary noise reduction algorithms filter out background noise and reverberations that are present in the acoustic environment.

The Voice Tracker™ Array Microphone contains eight “always on” array elements, which, when combined with its two stage noise reduction algorithms, give it an effective range of 30+ feet for meeting recording, and several feet for automatic speech recognition.

Our patented steering technology employs digital electronics and proprietary embedded algorithms. There are no moving parts, so the Voice Tracker™ Array Microphone is rugged, reliable, and easy to use. Simply plug it into your computer's sound card and a wall outlet. No software needs to be loaded, and there is no drain on your computer's processing capacity.

The Voice Tracker™ Array Microphone is also the only array microphone to employ Location Dependent Squelch (LDS™, Patent Pending) which de-sensitizes the microphone to sounds coming from pre-selected directions. Consequently, the array can reduce unwanted sounds coming from directions outside its field of view.This is helpful in reducing acoustic echo in Conference Applications.

• Automatic electronic steering of "listening beam" to talker location
• Selectable steering limits (90 degrees and 180 degrees) for speech recognition and Meeting recording modes
• Selectable LDS™ to reduce annoying interference of additional talkers during speech recognition or feedback during teleconferencing
• Two stage noise reduction (spatial filtering and noise reduction processing)
• 8 element, 18 inch long array for maximum range
• 5 element "in range" light to indicate location of chosen talker and sufficiency of signal
• Microphone tilt capability to facilitate desktop, monitor top, ceiling, or wall mounting
• Weight: 1.5 pounds(excluding wall power supply)
• Power: converter from 120V AC to 6V DC included
• Compatible with a variety of operating systems including:
  • Apple/Macintosh
    • Mac OS
    • Mac OS X
  • Microsoft
    • Windows 3.x
    • Windows 95
    • Windows 98
    • Windows NT
    • Windows 2000
    • Windows ME
    • Windows XP
    • Windows Vista
    • Windows 7

Range
30+ feet for meeting recording (depends on acoustic characteristics of the room.)

Analog Output
(6ft male/male audio cable included). Mic level 3.5mm ministereo jack. Same signal on tip & ring 500 ohm output impedance.

Frequency Response
100Hz to 11,250 Hz

Physical Dimensions
Length: 18" Height: 2.5" Weight: 2.5lbs

Power Equipment
(wall-powered converter included) 6V DC 400 ma Center Pin Positive

One Voice Tracker™ Array Microphone

The perfect complement for digital conference recording systems. The Philips conference microphone delivers brilliant sound quality, accompanied by outstanding ease of use. Revolutionary technology in a straightforward form.

Fast and easy set up for hassle-free installation

No microphone stand required

Sound pick-up from a 360 degree radius for a perfect recording experience

Boundary layer design utilizes the acoustic pressure of the surface

Expandable through cascading

Wire storage and length adaptation build into base

Design
Boundary layer microphone

Type
Electret condenser microphone

Output Impedance
Approx. 2.2 kOhm @ 1 kHz

Sensitivity
-38 dBV

Frequency response
30 Hz - 18 kHz

Phantom supply voltage
1,5 to 5 V/ 0,5mA

Audio plug
3.5 mm

Audio jack
3.5 mm

Cable length
2 m / 6.5 ft

Dimensions
5.2 x 1.1 x 7.9 inches

Weight
7.2 ounces

Conference microphone

Adapter plug (3.5mm to 2.5mm)

Adapter plug (analog)

The directional design limits interference from nearby sound sources. This is useful for recording a particular voice or signal that would otherwise be obscured or overpowered by other sources. For example, the ME-31 can help capture a keynote speaker at a conference without recording a lot of chatter from attendees.

Durable metal construction.

Desktop microphone stand features a removable grip.

Wind screen included to reduce wind noise.

Pick Up Pattern
Unidirectional

Frequency response
70 dB @ 15,000 Hz

Sensitivity
-32.5 dB ± 4 dB

Output impedance
1.8 k

Power supply
Plug-in-power system (1.5 V - 5 V)

Output Plug Type
3.5 mm gold-plated 3-prong monaural plug

External dimensions
83 in (21 mm) x 6.10 in (155 mm)

Cord Length
1.5 m / 59 in

Weight
Approx. 3.44 oz (97.5 g) (including the cords)

Included
Wind screen, Grip, Stand, Stand adapter, Case

Microphone

Desktop Microphone Stand

Stand Adapter

Wind Screen

Case

The directional design limits interference from nearby sound sources. This is useful for recording a particular voice or signal that would otherwise be obscured or overpowered by other sources. For example, the ME-32 can help capture a keynote speaker at a conference without recording a lot of chatter from attendees.

Unidirectional (Mono) Microphone

Wind screen included to reduce wind noise

Directionality
Unidirectional (Mono)

Frequency response
70-14,000Hz

Sensitivity
-36.8 dB ± 4 dB

Power supply
Plug-in-power system (1.5 V 5 V)

External dimensions
19.2 x 26.6 x 115.9mm

Cord Length
1.5 m

Weight
Approx. 31g (including the cords)

One ME-32 Compact Zoom Microphone

Wind Screen

Case

The CM-1000 pocket-sized omni-directional microphone is the perfect answer to flawless transfer of sound for the recording of meetings, conferences, depositions, lectures and more! It is truly an essential ingredient to your next significant business meeting.

Can be Daisy-Chained together!

Excellent audio clarity

Full 360 degree omni-directional

Built-in echo cancellation and noise reduction

Mac and PC compatible

Great for portable recording devices

5 Foot Cord

Can be daisy chained together to increase range

Standard 3.5mm plug to fit most recording devices

Type
Omni-Directional

Microphone
Noise Reduction

Cord Length
5 feet

CM-1000 Conference Microphone

The VEC GN-1 gooseneck microphone can be used for moderated sales meetings, public address functions and courtroom, laboratory and surgical suite environments proving assurance that the spoken word will be heard clearly with distortion-free clarity.

The GN1 Gooseneck Microphone is modular in design with a sturdy dull-coat finish black base, a flexible 18 inch shaft and a phantom-powered, uni-directional microphone. A 10 ft. cord and a 3.5mm stereo plug add to the versatility of this gooseneck microphone making it the ideal choice for hands-free directional activities. And the GN-1 is the perfect addition to computers featuring sound card recording capability and voice recognition. It performs superbly in cluttered sound environments. The uni-directional microphone focuses on your voice while gently eliminating peripheral distracting sound. A microphone wind-screen cover also comes with the GN-1 and further reduces ambient noise.

one 18" GN-1 3.5mm plug directional microphone

Small Plug-in microphone for use with the DS2, DM10, DM20 and DS2200 recorders.

Sensitivity of - 40 dB, frequency response from 100 - 7,000 Hz.

Stereo Microphone

Extension Cable and Tiepin Clip Included

The ME-15 is a small, lightweight tie-clip microphone that can be clipped to the tie or the collar, or under a jacket or shirt for concealment. The ME-15 is an ideal accessory for Olympus digital voice recorders. When using with Olympus Pearlcorder Microcassette recorders, please purchase the PA-1 plug adapter.

Tie-Clip Style Microphone

Lightweight

Type
Electret condenser microphone

Directionality
Non-directional

Frequency response
100 - 12,000Hz

Sensitivity
-42dB at 1kHz (0dB = 1V/Pa)

Output impedance
2.2kOhm

Power supply
Plug-in-power system (1.5V . 10V)

Cord length
1m (3.3ft)

Output Plug Type
3.5mm Monaural mini-plug

External dimensions
8.8(.35) x 34.3(1.35) mm(inches)

Weight
Approx. 11g (.39oz)

Included
Tiepin-type clip

ME-15 Tie Clip / Lapel Microphone

Tie Clip

Replacement stereo microphone for the one supplied with the DS-50.

Replacement stereo microphone for the one supplied with the DS-30.

Replacement stereo microphone for the one supplied with the DS-40.

Combines a single earphone with a microphone. 3.6 feet (1.1 meter) cable.

For use with: Digital Pocket Memo 9600, 9500 series, 9370, Conference Recording System 955 and Digital Voice Tracers.

Condenser microphone provides highest recording quality

Unidirectional design picks up speaker's voice only

A tie clip keeps the microphone always in place

Though the CM series of conference microphones are small in size they are truly big on performance. Just 2 1/4 inches square in size, the CM-909 features an omni-directional pick-up enabling it to record conversations from anywhere in a room while monitoring and adjusting to acoustical changes. Placed at the center of a conference table, the Conference Microphone enables you to conduct simultaneous group discussions at normal volume levels with the assurance that all parties will be heard clearly with distortion-free clarity. The CM-909 comes with 10 foot connector cords and 3.5mm plugs.

Tie clip microphone for use with: DPM 9600, 9500 Series, 9370 and 955 System. 1.2 meter cord (approximately 4 feet)